Dodge Dart Roof Rack Installation And Review Videos

Yakima Roof Rack Installation - 2016 Dodge Dart- Video

Today on our 2016 Dodge Dart we'll be taking a look at the Yakima Roof Rack Kit. This consists of the Yakima JetStream Crossbars, part number Y00425, the BaseLine Towers, part number Y00146, and two sets of base clip fit kits, first one is part number Y06118 for the front, and part number Y06123 for the back. The Yakima Rook Rack Kit will allow you to carry many different vehicle accessories on your vehicle's roof rack system, whether that's bike racks, cargo boxes, cargo baskets, or ski and snowboard carriers. The JetStream Crossbars are an aerodynamic design which will reduce wind noise and drag and allow you to carry vehicle accessories, whether they're clamp-on or channel mounted accessories. The whole kit has a quick and easy installation, we'll show you how to do that next. Now everything that you see here on our table is included with our kit, the only thing you'll need to provide yourself is a flat tape measure of some sort. We have our BaseLine Foot Pack here, our end cap for our Crossbar, our fit kit for the back bar, our adapters to connect our Foot Pack to our Crossbar, and then our included tool that's going to help us tighten everything down. more

12/15/2016 4:32:44 PM

Rhino Rack Roof Rack Review - 2016 Dodge Dart- Video

Today on our 2016 Dodge Dart we're doing a test fit of the Rhino-Rack roof rack kit. This is consisting of part numbers RRVA126B-2. It's going to be our Vortex Aero crossbars. For our legs we're using the 2500 series legs for Vortex crossbars, part number RRRLKVA. Then our custom fit kit for our Dodge Dart, we're using part number DK402. Everything you see here on our vehicle is what is included. more

11/28/2016 11:57:18 AM

Thule Traverse Roof Rack Installation - 2013 Dodge Dart- Video

Today on our 2013 Dodge Dart we'll be test fitting the Thule Square Bar Roof Rack System, part numbers thkit1667, th480, and thlb58. Now with our feet, fit kit and load bars already assembled according to the included instructions, we'll begin our test fit by placing the front load bar onto the front of the vehicle. We'll need to measure from the front part of the glass to the first part of the foot on both the passenger and driver side of the vehicle to ensure that the load bar is perpendicular to the vehicle and the fit kit contours to the roof line correctly. After establishing this position, we'll use the included tensioning tools to tighten down the feet to secure the load bar to the vehicle. Note that you may want to tighten down each foot a little at a time so that one side of the load bar doesn't favor one side of the vehicle. We'll now place the load bar onto the rear of the vehicle and we'll need to measure the crossbar spread. more

6/7/2013 6:37:38 AM

Yakima Q Tower Roof Rack Installation - 2013 Dodge Dart- Video

Today on our 2013 Dodge Dart we'll be test fitting the Yakima Round Bar Roof Racking System, part numbers y00409, y00124, y00606 and y00702. Now with our Q-clips, towers and crossbars already assembled according to the instructions we'll begin the test fit by placing the front crossbar onto the front of the vehicle. We'll then measure from the front part of the glass to the first part of the tower as indicated in the instructions.We'll measure seven inches on both the passenger and driver's side of the vehicle making sure that the crossbar is perpendicular to the vehicle and the pads on the underside of the Q-towers contour correctly to the vehicle. Once we've established this position on the crossbar we'll then tighten down the silver bolts on the inside of the tower and latch down the black plastic covers.Now you may want to alternate sides when tightening down the silver bolts as when closing the black plastic covers the crossbar will tend to favor to one side. Now with the front crossbar secured to the vehicle we're ready to load our rear crossbar. We'll place our rear crossbar onto the rear of the vehicle and measure the crossbar spread. more

6/5/2013 2:06:05 PM